Green-L H3 LED Headlight Bulbs Conversion Kit Replacement of Halogan / HID Kit 90W 9800lm 6000k : Can be fitted to a Mazda MX-5 nc3.5 projector headlamps with extra adapters but not straight forward

Really pleased to do small business with you again?.

Extremely vivid specially when employed with a wiring relay update nevertheless the beam pattern could be improved. Really don’t know if this is adjustable. Equipped in considerably less than thirty minutes and had to minimize a gap in the dust cover for the warmth sinks.

Green-L H3 LED Headlight Bulbs Conversion Kit Replacement of Halogan / HID Kit 90W 9800lm 6000k (Pack of 2pcs)

  • Super Bright: Can produce 4900lm for each LED bulb, with pure white daylight (6000K), no blind zone.
  • Directly plug and play for most vehicles,easy installation. Yet for some vehicles equipped with a CANBUS systems, our LED Headlights may not light up or flicker. Anti-flicker Relay Harness or Load resistor is needed to prevent it.
  • Super Slim: Very small size, can replacement not only halogen bulb, but also HID bulb.
  • Better Heat Dissipation: The fan is replaced by red copper and aluminum, thus the heat dissipation range is wider and it is more stable. No Need Worry The Fan Dead, And Noisy.
  • Longer Life: Last more than 50,000 Hours. Works underwater! Rainproof driver, housing, and fan works even in extreme situations. We offer a free 2 year warranty and lifetime support.

That’s the only way to describe these models. I have used the ‘xenon’ updates ahead of, but they actually have practically nothing on these. Lifeless quick to fit ( you will most likely want to slash a slot in the dust addresses to allow for the warmth sinks by means of) but, other than that, it is no a lot more difficult than altering a bulb. The beams are fantastic – i have factory led lights on my mercedes and these are fairly significantly equal. Colour is identical and get to/brightness are significantly the similar. I would suggest these to any one.

Extremely good merchandise but not so powerful light like a hid.

Purchased these to switch some just after areas fifth gen led bulbs which for some explanation the passenger facet bulb stopped working?. And as soon as eliminated and plugged again commenced functioning once more?initially impressions, these bulbs are a right cylindrical rear housing created of aluminium with a cable and the warmth sink fins immediately coming out of the rear. I also acquired a 2nd hand pair of headlight rubber dust handles and slit 4 pieces in the centre to let for the fins, cable and rear housing to pass as a result of. Fitting these on a mx-5 is a little bit fiddly. You will have to have to purchase some extra important adapters so that the lights can be fitted and clipped into the headlamp housing ( purchased from amazon for as a minor as £3. As the original bulb holder will have to be employed separately as it truly is made use of to plug in the led driver. Also the connector on the led driver is a tiny slack as nicely so have applied electrical tape to keep in location and assistance hold humidity having in. Given that fitting these it provides a wonderful white mild. All right the bulbs equipped in the mx-5 have had to be equipped off centre to wherever the leds are generally positioned by means of the adhering to clock positions 12 and six. Due to the fact of this the leds are pointing 10 and four. This is due to the fact of the way the lip on the bulb holder has to suit in the headlamp housing. On inspection of the gentle casting i can see a skinny blue line at the top on just about every headlamp. So suspicious these may well not pass an m.

Green-L H3 LED Headlight Bulbs Conversion Kit Replacement of Halogan / HID Kit 90W 9800lm 6000k (Pack of 2pcs) : Very bright, white beam with similar beam pattern to standard bulbs due to the positioning of the leds emulating that of a halogen filament. I inserted just one side first to compare with the standard halogen and the difference is more than noticeable and definitely worth the upgrade. The braided metal heat sink can be moulded to fan out in many shapes etc so easier to fit into the light housing than the larger led’s with built in fan units. Haven’t been able to test long term yet, but initial impressions are very good.


One thought on “Green-L H3 LED Headlight Bulbs Conversion Kit Replacement of Halogan / HID Kit 90W 9800lm 6000k : Can be fitted to a Mazda MX-5 nc3.5 projector headlamps with extra adapters but not straight forward

  1. Size: H1 Verified Purchase
    I bought h1 replacements for my nissan skyline. Unfortunately these bulbs are 2-3mm too long and wouldn’t seat properly which caused me to fail an mot and have had to revert to standard bulbs. (incorrect beam image due to incorrect fitment) the brightness and colour/clarity are spot on and so much nicer than my old hid’s.
    • Size: H1 Verified Purchase
      I bought h1 replacements for my nissan skyline. Unfortunately these bulbs are 2-3mm too long and wouldn’t seat properly which caused me to fail an mot and have had to revert to standard bulbs. (incorrect beam image due to incorrect fitment) the brightness and colour/clarity are spot on and so much nicer than my old hid’s.
  2. Size: H7 Verified Purchase

    This review is from : Green-L H3 LED Headlight Bulbs Conversion Kit Replacement of Halogan / HID Kit 90W 9800lm 6000k (Pack of 2pcs)

    Bought these to replace some after parts 5th gen led bulbs which for some reason the passenger side bulb stopped working?. And once removed and plugged back started working again?first impressions, these bulbs are a proper cylindrical rear housing made of aluminium with a cable and the heat sink fins directly coming out of the rear. I also bought a second hand pair of headlight rubber dust covers and slit 4 parts in the centre to allow for the fins, cable and rear housing to pass through. Fitting these on a mx-5 is a bit fiddly. You will need to buy some extra key adapters so that the lights can be fitted and clipped into the headlamp housing ( bought from amazon for as a little as £3. As the original bulb holder will have to be used separately as it’s used to plug in the led driver. Also the connector on the led driver is a little slack as well so have used electrical tape to keep in place and help keep moisture getting in. Since fitting these it gives a nice white light. Okay the bulbs fitted in the mx-5 have had to be fitted off centre to where the leds are usually positioned via the following clock positions 12 and 6. Because of this the leds are pointing 10 and 4. This is because of the way the lip on the bulb holder has to fit in the headlamp housing. On inspection of the light casting i can see a thin blue line at the top on each headlamp. So suspicious these may not pass an m.
  3. Size: H7 Verified Purchase

    This review is from : Green-L H3 LED Headlight Bulbs Conversion Kit Replacement of Halogan / HID Kit 90W 9800lm 6000k (Pack of 2pcs)

    Bought these to replace some after parts 5th gen led bulbs which for some reason the passenger side bulb stopped working?. And once removed and plugged back started working again?first impressions, these bulbs are a proper cylindrical rear housing made of aluminium with a cable and the heat sink fins directly coming out of the rear. I also bought a second hand pair of headlight rubber dust covers and slit 4 parts in the centre to allow for the fins, cable and rear housing to pass through. Fitting these on a mx-5 is a bit fiddly. You will need to buy some extra key adapters so that the lights can be fitted and clipped into the headlamp housing ( bought from amazon for as a little as £3. As the original bulb holder will have to be used separately as it’s used to plug in the led driver. Also the connector on the led driver is a little slack as well so have used electrical tape to keep in place and help keep moisture getting in. Since fitting these it gives a nice white light. Okay the bulbs fitted in the mx-5 have had to be fitted off centre to where the leds are usually positioned via the following clock positions 12 and 6. Because of this the leds are pointing 10 and 4. This is because of the way the lip on the bulb holder has to fit in the headlamp housing. On inspection of the light casting i can see a thin blue line at the top on each headlamp. So suspicious these may not pass an m.
  4. Size: H7 Verified Purchase

    This review is from : Green-L H3 LED Headlight Bulbs Conversion Kit Replacement of Halogan / HID Kit 90W 9800lm 6000k (Pack of 2pcs)

    That’s the only way to describe these units. I have used the “xenon” upgrades before, but they really have nothing on these. Dead easy to fit ( you will probably need to cut a slot in the dust covers to allow the heat sinks through) but, other than that, it is no more difficult than changing a bulb. The beams are fantastic – i have factory led lights on my mercedes and these are pretty much equal. Colour is identical and reach/brightness are much the same. I would recommend these to anyone.
    • Size: H7 Verified Purchase
      That’s the only way to describe these units. I have used the “xenon” upgrades before, but they really have nothing on these. Dead easy to fit ( you will probably need to cut a slot in the dust covers to allow the heat sinks through) but, other than that, it is no more difficult than changing a bulb. The beams are fantastic – i have factory led lights on my mercedes and these are pretty much equal. Colour is identical and reach/brightness are much the same. I would recommend these to anyone.
      • Size: H7
        Very bright especially when used with a wiring relay upgrade however the beam pattern could be better. Don’t know if this is adjustable. Fitted in less than 30 minutes and had to cut a hole in the dust cover for the heat sinks.
  5. Size: H7

    This review is from : Green-L H3 LED Headlight Bulbs Conversion Kit Replacement of Halogan / HID Kit 90W 9800lm 6000k (Pack of 2pcs)

    Very bright especially when used with a wiring relay upgrade however the beam pattern could be better. Don’t know if this is adjustable. Fitted in less than 30 minutes and had to cut a hole in the dust cover for the heat sinks.

Comments are closed.